HOME sm00800 Wear safety glasses or goggles when removing or installing retaining rings. Retaining rings can slip from the pliers and could be propelled with enough force to cause serious eye injury. (00312a) The inner (black) retaining ring and the outer (zinc plated) retaining ring are different in size by 1 mm. NOTE sm00802 Figure 6-95. Shift Shaft Inner Retaining Ring Figure 6-98. Shift Shaft Seal Installation 6-32 2009 VRSC Service: Transmission sm00801 Figure 6-96. Shift Actuator INSTALLATION PART NUMBER TOOL NAME HD-45337 SHIFT SHAFT SEAL INSTALLER 1. See Figure 6-97. To insert shift shaft, use leading end of shift shaft to engage the shift actuator.
Using hand pres- sure, center the shift shaft to engage the actuator splines. Seat shift shaft deep enough to expose inner retaining ring groove. Figure 6-97. Shift Shaft Installation 2. Insert inner retaining ring (black). 3. See Figure 6-98. Lubricate shift shaft seal with Harley- Davidson Motorcycle Oil 20W50 and insert using SHIFT SHAFT SEAL INSTALLER (Part No. HD-45337). 4. Install outer retaining ring (zinc plated). sm00803