HOME 7.11 HEADLAMP: VRSCAW/VRSCF GENERAL The headlamp contains separate high and low-beam headlamp bulbs. Each bulb is a replaceable high output quartz halogen bulb type. Never touch the quartz bulb. Fingerprints will etch the glass and decrease bulb life. Grab the bulb with paper or a clean, dry cloth. Failure to do so could result in bulb damage. (00210a) When replacement is required, use only the specified sealed beam unit or bulb, available from a Harley-Davidson dealer. An improper wattage sealed beam or bulb, can cause charging system problems. (00209a) Handle bulb carefully and wear eye protection.
Bulb con- tains gas under pressure, which, if not handled carefully, could cause serious eye injury. (00062b) sm01080a 1 2 4 5 6 3 3 7 9 11 10 8 1. Headlamp mounting bracket (VRSCF) 2. Bracket mounting fastener (2, VRSCAW/VRSCF) 3. Fastener (2, VRSCAW/VRSCF) 4. Headlamp mounting bracket (VRSCAW) 5. Fastener (2) 6. Headlamp bucket 7. Fiber washer (2) 8. Position lamp and harness (HDI only) 9. Light bulb, low beam 10. Light bulb, high beam 11. Headlamp lens/reflector assembly Figure 7-21. Headlamp/VRSCAW/VRSCF 2009 VRSC Servic e: Electrical 7-17