Cleaning the brush Caster Wheel 1. Flip the vacuum-mop over and remove the caster wheel upwards. 2. Clean any hair, dirt, and debris from the caster wheel. 3. Reinstall the caster wheel. Cut hair Remove dirt and debris Note: It is recommended to replace the brush every 6–12 months for an optimal cleaning effect. Side Brush 1. Flip the vacuum-mop over and remove the screw that secures the side brush in place. 2. Remove and clean the side brush. 3. Reinstall the side brush and tighten the screw. Sensors Use a sof, dry cloth to periodically clean the cliff sensors and the edge infrared sensor. Cliff Sensors Note:
It is recommended to replace the side brush every 3–6 months for an optimal cleaning effect. Edge Infrared Sensor Note: Do not use chemicals such as detergents or sprays to clean the sensors. 15