Supermicro A+ Server 4022G-6F — Supermicro A+ Server 4022G-6F User's Manual PDF Download

A+ Server 4022G-6F User's Manual Watch Dog Enable/Disable JWD1 enables the Watch Dog function, a system monitor that takes action when a software application freezes the system. Jumping pins 1-2 will have WD reboot the system if a program freezes. Jumping pins 2-3 will generate a non-maskable interrupt for the program that has frozen. See the table on the right for jumper settings. Watch Dog must also be enabled in BIOS. Note: When Watch Dog is enabled, the user must write their own application software to disable the Watch Dog Timer. USB Wake-Up JPUSB2 jumper allows you to "wake up" the system by pressing a key on the USB keyboard or by clicking the USB mouse of your system.

These jumpers are used in conjunction with the USB Wake-Up function in the BIOS. See the table on the right for jumper settings and jumper connections. (the default is Enabled) 5-11 Onboard Indicators LAN1/LAN2 LEDs The Ethernet ports (located beside the VGA port) have two LEDs. On each Gb LAN port, one LED blinks to indicate activity while the other may be green, amber or off to indicate the speed of the connection. See the table on the right for the functions associated with the connection speed LED. Dedicated IPMI LAN LEDs A dedicated IPMI LAN is also included on the H8DG6-F/H8DGi-F serverboards.

The amber LED on the right indicates activity, while the green LED on the left indicates the speed of the connection. See the table at right for more information. 5-24 Watch Dog Jumper Settings (JWD1) Jumper Setting Definition Pins 1-2 Reset Pins 2-3 NMI Open Disabled Backpanel USB Wake-Up Enable (JPUSB2) Jumper Settings Jumper Setting Definition Pins 1-2 Enabled (default) Pins 2-3 Disabled LAN LED (Connection Speed Indicator) LED Color Definition Off 10 MHz Green 100 MHz Amber 1 GHz IPMI LAN Link LED (Left) & Activity LED (Right) Color Status Definition Green: Solid Link (Left) 100 Mb/s Amber Blinking Activity (Right) Active