A90 series Inverter User Guide 59 F10.02 Modbus Data Format 0: 1-8-N-1 (1 start bit + 8 data bits +1 stop bit) 1: 1-8-E-1 (1 start bit + 8 data bits + 1 even parity + 1 stop bit) 2: 1-8-O-1 (1 start bit + 8 data bits + 1 odd parity + 1 stop bit) 3: 1-8-N-2 (1 start bit + 8 data bits +2 stop bits) 4: 1-8-E-2 (1 start bit + 8 data bits + 1 even parity +2 stop bits) 5: 1-8-O-2 (1 start bit + 8 data bits + 1 odd parity +2 stop bits) 0 〇 F10.03 Modbus Overtime 0.0 - 60.0, 0.0: Disabled (also works for master - slave system) s 0.0 ● F10.04 Modbus Response Delay 1 - 20 ms 2 ● F10.05 Master-Slave Communication Function 0: Disabled 1: Enabled 0 〇 F10.06 Master-Slave Options 0: Slave 1:
Master (Modbus broadcast) 0 〇 F10.07 Data Sent by Master 0: Output Frequency 1: Set Frequency 2: Output Torque 3: Set Torque 4: PID Setting 5: Output Current 1 〇 F10.08 Receiving Proportionality Factor of Slave 0.00 - 10.00 (Times) 1.00 ● F10.09 Sending Interval of Master 0.000 - 30.000 s 0.200 ● F10.56 RS485write EEPROM 0～10：default for debugging 11: No trigger write to protect EEPROM. Please set 11 after debugging 0 ● F11 User optional parameter group This group of parameters users generally do not need to adjust, please refer to A90 user guide or visit www.sineedrive.com download function table electronic version. F12 Keypad and Display Function Group F12.00 M.K 0: No Function 1:
Forward JOG 2: Reverse JOG 3: Forward/Reverse Switch 4: Rapid Stop 5: Coast to Stop 6: Left Shift 1 〇