sinee — A90 User Manual

User Manual of A90 Series Inverter Frame 1 Frame 2 Frame 3 Exceptional frame Normal t 0 At least 3.5 characters At least 3.5 characters > 1.5 characters 3.5 characters 4.5 characters Fig. 0-3 Schematic Diagram of Normal and Exceptional Data Frames 12.4.2 Data frame processing Upon receiving a frame data, the system will first perform preprocessing to determine whether it is a legal frame sent to this machine and check whether the data is correct, followed by final processing. If the received frame is not legal, the data will not be sent back. If the received frame is legal but incorrect, the corresponding exceptional message frame will be sent back. Legal frame:

Meet the address (local or broadcast) and length (not less than 3) requirements. is within the defined range and can be processed at present. Correct frame: It is a legal frame with a correct memory address. The memory content 12.4.3 Response delay The response delay (depending on the function code F10.04) is defined as the time interval from the reception of valid data frame [7] (data in the RS-485 network, different from the command sent by the keyboard) to data parsing and return.

Since the starting and ending characters are defined in the standard protocol, it is impossible to avoid response delay, at least “3.5-character time interval + 1 ms (chip stabilization time of 485 protocol, t wait2 )”. The specific minimum time interval is related to the baud rate. If the baud rate is 9600bps, the minimum response delay is 5ms (3.5Ч10/9600+1=4.64≈5). If the communication data involves EEPROM operation, the time interval will be longer. [ 7 ]: Valid data frame: Sent by the external master station (not keyboard) to this 295