PositioningLevel PositioningLevel VPARAMETER 561 Configurable effort level of the instance positioning process. The value is expressed as a percentage. The minimal allowable value is 10. Lower values will provide coarser positioning and lower execution time. Conversely, a value of 100 will provide the highest accuracy for the positioning of object instances. Syntax MicroV+ VPARAMETER (sequence_id, tool_id, 561, index_id, object_id) = value value = VPARAMETER (sequence_id, tool_id, 561, index_id, object_id) V+ VPARAMETER (sequence_id, tool_id, 561, index_id, object_id) $ip = value value = VPARAMETER ($ip, sequence_id, tool_id, 561, index_id, object_id) Type Long Range Minimum: 0 Maximum:
10 Parameters ACE Reference Guide, 18317-000 Rev A Page 447 sequence id _ Index of the vision sequence. The first sequence is 1. tool id _ Index of the tool in the vision sequence. The first tool is 1. ID 561: the value used to reference this property. index id _ N/A object id _ N/A $ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP address format, for example: 192.168.1.120.