SearchMode SearchMode VPARAMETER 5101 Specifies the method used by a Finder tool to select a hypothesis. Syntax MicroV+ VPARAMETER (sequence_id, tool_id, 5101, index_id, object_id) = value value = VPARAMETER (sequence_id, tool_id, 5101, index_id, object_id) V+ VPARAMETER (sequence_id, tool_id, 5101, index_id, object_id) $ip = value value = VPARAMETER ($ip, sequence_id, tool_id, 5101, index_id, object_id) Type Long Range The range depends on the type of entity. For arcs (Arc Finder Tool), the range is: For lines (Line Finder Tool), the range is: ACE Reference Guide, 18317-000 Rev A Page 472 Value Description 0 hsBestArc Selects the best arc according to hypothesis strength.
1 hsArcClosestToGuideline Selects the arc hypothesis closest to the Guideline. 2 hsArcClosestToInside Selects the arc hypothesis closest to the inside of the tool Search Area. (closest to the tool center). 3 hsArcClosestToOutside Selects the arc hypothesis closest to the outside of the tool Search Area. (furthest from the tool center) Value Description 0 hsBestLine Selects the best line according to hypothesis