SearchMode For points (Point Finder Tool), the range is: Parameters ACE Reference Guide, 18317-000 Rev A Page 473 Value Description strength. 1 hsLineClosestToGuideline Selects the line hypothesis closest to the Guideline. 2 hsLineWithMaximumNegativeXOffset Selects the line hypothesis closest to the Search Area bound that is at maximum negative X-offset. 3 hsLineWithMaximumPositiveXOffset Selects the line hypothesis closest to the Search Area bound that is at maximum positive X-offset. Value Description 1 hsPointClosestToGuideline Selects the point hypothesis closest to the Guideline.
2 hsPointWithMaximumNegativeXOffset Selects the point hypothesis closest to the Search Area bound that is at maximum negative X-offset. 3 hsPointWithMaximumPositiveXOffset Selects the point hypothesis closest to the Search Area bound that is at maximum positive X- offset $ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP address format, for example: 192.168.1.120. sequence id _ Index of the vision sequence. The first sequence is 1. tool id _ Index of the tool in the vision sequence. The first tool is 1. ID 5101: the value used to reference this property. index id _ N/A object id _ N/A