AH Motion Controller – Hardware Manual 5. Serial control interface with multiple functions _1 AHxxEMC-5A provides one serial interface through USB: COM1. AHBP03M2-5A/AHBP05M2-5A (AH motion backplane) provides one s erial interface through termi nal block: COM2. You can use the USB serial i nterface (COM1) as RS-232 and terminal block serial interface (COM2) as RS-485 according to the application. The data transfer rate can be increased from 9600 bps to 115200bps. ISPSoft,can perform automatic data exchange simply by filling the data exchange form in the software. Users do not need to write any program for this purpose an d can sa ve time and efforts.
For details of dat a exchange between devices, refer to ISPSoft User Manual . 6. Memory card The memory card has the following functions. System backup: for user program, CPU parameters, module tables, and setting values in devices. System recovery: for user program, CPU parameters, module tables, and setting values in devices. Parameter storage: The values in the devices Log storage: The system error log and the system status log 7. Hot swap The AH motion series I/O modules support the on-line uninterruptible hot swapping. When the system runs, users can replace the module with error without stopping the system or setting the module to offline state.
After the module is replaced, the new module will resume normal operation automatically. 1-4