Chapter 2 System Configuration AH500 Series Module Configuration Power supply module AH Motion CPU Digital I/O, Special I/O Motion backplane 2_ AH Motion CPU Network Configuration EtherCAT network configuration(AH10EMC) EtherCAT slaves 2.1.1. AH Motion CPU Network Configuration Servo Drives Inverters General-prupose slaves b C AHxxEMC – EtherCAT The EtherCAT network configuration includes AHxxEMC which is the core motion CPU, an AH motion backplane*, and an AH500 series power supply module. You can connect the built-in EtherCAT master port to the EtherCAT slave devces. The AHxxEMC can also be used as a motion control module in an AH500 series PLC configuration.
You can install it onto the AH500 series main backplane to perform motion control function. For more information about this application, refer to AH500 Motion Control Module Manual . *Note : The AH motion backplane must be used together with AHxxEMC when you use AHxxEMC as a motion CPU. 2-3