Chapter 3 Product Specifications The user-defined input device range: D60~D75 Motion Control Modules input registers should be within the range between D0 and D65535 , and the output registers should be within the You can assign input registers and output registers to a motion control module through HWCONFIG in ISPSoft. The range between D0 and D65535 . Take AH04HC-5A for example. The original input registers are D0~D27. You can change the input device range from D0~D27 to D200~D227. 3_ The default input device range: D0~D27 The user-defined input device range:
D200~D227 Network Modules registers should be within the range between D0 and D65535 , and the output registers should be within the range You can assign input registers and output registers to a network module through HWCONFIG in ISPSoft. The input between D0 and D65535 . Take AH10EN-5A* for example. The original input registers are D0~D19. You can change the input device range from D0~D19 to D150~D169. *Note : The diagram below is only a demonstration on changing input device range. 3-13