Mitsubishi — 5.7.2 Wiring AH08PTG-5A

AH500 Hardware Manual 5.7.2 Wiring AH08PTG-5A *1. The cable connected to the input terminal should be the cable or the shielded twisted pair cable which can be connected to an Ni100/Ni1000/Pt100/Pt1000 sensor, and should be kept separate from other power cables and cables which generate noise. Please use a three-wire temperature sensor. If users want to use a two-wire temperature sensor, O n + and I n + must be short-circuited, and O n - and I n - must be short-circuited. ( n is in the range of 0 to 7.) *2. If users want to measure resistance in the range of 0 Ω to 300 Ω, they can use a two-wire or three-wire sensor instead of a four-wire sensor. *3.

User need to select an appropriate sensor. If an Ni100 temperature sensor, a Pt100 temperature sensor, or a resistance sensor is used, the internal excitation current is 471.5 μA. If an Ni1000 temperature sensor, or a Pt1000 temperature sensor is used, the internal excitation current is 204.8 μA.

5-52 471.5uA (Ni 100P,t100, Resistor)/ 0+ 204.8uA (Pt1000)*3 + + A DC - - 0- IN A G 1 + + - 1 - AG 471.5uA (Ni 100P,t100, Resistor)/ 2+ 204.8uA (Pt1000)*3 + + A DC - - 2- IN A G 3 + + - 3 - AG 0 ~300Ω N i10 0/Ni10 00 P t10 0/Pt10 00 Shielded cable *1 CH 0 O I0 I0 O 2-Wire F 0~3 00Ω Ni 100/Ni 1000 Pt100/Pt1000 Shielded cable *1 CH 1 O I1 I1 O FG 3-Wire 471.5uA (Ni 100P,t100, Resistor)/ 0+ 204.8uA (Pt1000)*3 + + A DC - - 0- IN A G 1 + + - 1 - AG Ni1 00/Ni1 000 Pt1 00/Pt1 000*2 CH 2 Shielded cable *1 O I2 I2 O F 4-Wire 0~3 00Ω Ni 100/Ni 1000 Shielded cable *1 CH 3 Pt100/Pt1000 O I3 I3 O FG 3-Wire 471.5uA (Ni 100P,t100, Resistor)/ 2+ 204.8uA (Pt1000)*3 + + A DC - - 2- IN A G 3 + + - 3 - AG O 0+ I0 I0 + - O F 0- G I1 I1 + - O 1 - I2 O F - 2- G I3 I3 + - O 3 -