Chapter 5 Wiring Points for attention: When users install AHAADP01EF-5A/AHAADP02EF-5A on a backplane, they have to make sure that AHAADP01EF-5A/AHAADP02EF-5A is connected to an extension port of the backplane correctly. (AHAADP01EF-5A must be connected to the lower extension port of the backplane, and AHAADP02EF-5A must be connected to the upper extension port of the backplane.) Otherwise, an error will occur if a CPU module connects to AHAADP01EF-5A/AHAADP02EF-5A. 5.10 Wiring Motion Control Modules 5.10.1 Specifications for Motion Control Modules AH02HC-5A 5-63 Item Specifications Number of channels 2 channels Input CH0: X0.8+, X0.8-, X0.9+, and X0.9- CH1:
X0.10+, X0.10-, X0.11+, and X0.11- (differential input) Pulse/Direction (one phase and one input) Counting up/Counting down (one phase and two inputs) One time the frequency of A/B-phase inputs (two phases and two inputs) Four times the frequency of A/B-phase inputs (two phases and two inputs) Input signal Pulse format Signal level 5~24 VDC Maximum The maximum frequency is 200 kHz. frequency of counting The number of sampled pulses is in the range of -200000 to 200000. The number of accumulated pulses is in the range of -999999999 to 999999999. The number of input pulses is in the range of -2147483648 to 2147483648. Specifications Range General count Circular count Type Input CH0:
X0.0+ and X0.0- CH1: X0.1+ and X0.1- (differential input) RESET input Signal level 5~24 VDC Maximum 15 mA current CH0: The high-speed pulse output Y0.8 is a transistor whose collector is an open collector. CH1: The high-speed pulse output Y0.9 is a transistor whose collector is an open collector. Output type Comparison output Signal level 24 VDC Maximum 15 mA current