Mitsubishi — 9.1.2 ERROR LED Indicator’s Blinking

AH500 Hardware Manual 9-6 Error Description Remedy code 16#2012 Incorrect division operation (SM0/SM5). Check the program, compile the program again, and download the program again. 16#2013 The value exceeds the range of values which can be represented by the floating-point numbers. (SM0/SM5) Check the program, compile the program again, and download the program again. 16#2014 The task designated by TKON/YKOFF is incorrect, or exceeds the range. (SM5) Check the program, compile the program again, and download the program again. 16#2015 There are more than 32 levels of nested program structures supported by CALL.

(SM0) Check the program, compile the program again, and download the program again. 16#2016 There are more than 32 levels of nested program structures supported by FOR/NEXT. (SM0/SM5) Check the program, compile the program again, and download the program again. 16#2017 The number of times FOR is used is different from the number of times NEXT is used. (SM5) Check the program, compile the program again, and download the program again. 16#2018 There is a label after FEND, but there is no SRET. There is SRET, but there is no label. (SM5) 1. Compile the program again, and download the program again. 2. Reinstall ISPSoft, compile the program again, and download the program again.

16#2019 The interrupt task is not after FEND. (SM5) 1. Compile the program again, and download the program again. 2. Reinstall ISPSoft, compile the program again, and download the program again. 16#201A IRET/SRET is not after FEND. (SM5) 1. Compile the program again, and download the program again. 2. Reinstall ISPSoft, compile the program again, and download the program again. 16#201B There is an interrupt task, but there is no IRET. There is IRET, but there is not interrupt task. (SM5) 1. Compile the program again, and download the program again. 2. Reinstall ISPSoft, compile the program again, and download the program again. 16#201C End is not at the end of the program. (SM5) 1.

Compile the program again, and download the program again. 2. Reinstall ISPSoft, compile the program again, and download the program again. 16#201D There is CALL, but there is no MAR. (SM5) 1. Compile the program again, and download the program again. 2. Reinstall ISPSoft, compile the program again, and download the program again. 16#201E The function code used in MODRW is incorrect. (SM102/SM103) Check the usage of the instruction and the setting of the operands. Please refer to the explanation of the instruction MODRW in AH500 Programming Manual for more information. 16#201F The length of the data set in MODRW is incorrect.

(SM102/SM103) Check the usage of the instruction and the setting of the operands. Please refer to the explanation of the instruction MODRW in AH500 Programming Manual for more information. 16#2020 The communication command received by using MODRW is incorrect. (SM102/SM103) Check whether the slave supports the function code and the specified operation.