Kaiyi — 15.4.2 Using CANopen Builder to Configure a Network

Chapter 15 CANopen Communication Module AH10COPM After the users select a mode, and save the setting, they can start CANopen Builder by means of Intelligent Module Configuration . 15.4.2 Using CANopen Builder to Configure a Network 1. After users click Online , the software will read the settings in AH10COPM on the backplane used. 2. After Online is clicked, the mode, backplane number, slot number, and node address of the module will be brought out by the software. After the users right-click the master station selected, and click Scan DeviceNet Network on the context menu which appears, the information about the node devices on the network created will be scanned. 15-9