Mitsubishi — 5.10.3 Absolute Two-speed Motion

AH500 Motion Control Module Manual 5.10.3 Absolute Two-speed Motion 1. Motion control function block The motion control function block T_AbsSeg2 is used to start absolute two-speed motion. The value of the Axis input pin indicates an axis number, and the value of the Velocity1 input pin indicates the speed of the first motion. The value of the Position1 input pin indicates the target position of the first motion, and the target position is an absolute position. The value of the Velocity2 input pin indicates the speed of the second motion. The value of the Position2 input pin indicates the target position of the second motion, and the target position is an absolute position. 2.

Input pins/Output pins 5-146 Input pin Name Function Data Setting value Time when a value is valid type Axis Motion axis number WORD K1~K16 The value of the Axis input pin is valid when there is a transition in the Execute input pin’s signal from low to high. Execute Motion is started when there is a transition in the Execute input pin’s signal from low to high. BOOL True/False - Position1 Absolute position of the first motion DWORD K-2,147,483,648~ K2,147,483,647 The value of the Position1 input pin is valid when there is a transition in the Execute input pin’s signal from low to high.

Velocity1 Target speed of the first motion DWORD K1~K2,147,483,647 The value of the Velocity1 input pin is valid when there is a transition in the Execute input pin’s signal from low to high.