Mitsubishi — 5.13.8 Setting High-speed Capture

Chapter 5 Applied Instructions The motion control function block T_Capture is used to start high-speed capture. The value of the Channel input pin indicates a capturer number. The value of the Source input pin indicates a source, the value of the TriggerDevice input pin indicates the device which triggers the capture of a value, the value of the InitialValue input pin is an initial value, and the value of the CapValue of output pin is the value captured. 2. Input pins/Output pins 1.

Motion control function block 5-253 Input pin Name Function Data Setting value Time when a value is valid type Channel Capturer number WORD 0~7 The value of the Channel input pin is valid when there is a transition in the Enable input pin’s signal from low to high. Enable The motion control function block is enabled when there is a transition in the Enable input pin’s signal from low to high. BOOL True/False - Source Source WORD mcCmpAxis1 (0): Present position of the first axis mcCmpAxis2 (1): Present position of the second axis mcCmpAxis3 (2): Present position of the third axis mcCmpAxis4 (3):Present position of the fourth axis mcCmpC200 (4): Present value in C200 mcCmpC204 (5):

Present value in C204 mcCmpC208 (6): Present value in C208 mcCmpC212 (7): Present value in C212 The value of the Source input pin is valid when there is a transition in the Enable input pin’s signal from low to high.