Mitsubishi — 5.13.8 Setting High-speed Capture

AH500 Motion Control Module Manual 5-254 Input pin Name Function Data Setting value Time when a value is valid type TriggerDevice Device which triggers the capture of a value WORD mcCapX0 (0): X0.0 mcCapX1 (1): X0.1 mcCapX2 (2): X0.2 mcCapX3 (3): X0.3 mcCapX8 (8): X0.8 mcCapX9 (9): X0.9 mcCapX10 (10): X0.10 mcCapX11 (11): X0.11 mcCapX12 (12): X0.12 mcCapX13 (13): X0.13 mcCapX14 (14): X0.14 mcCapX15 (15): X0.15 The value of the TriggerDevice input pin is valid when there is a transition in the Enable input pin’s signal from low to high.

InitialValue Initial value DWORD K-2,147,483,648~ K2,147,483,647 The value of the InitialValue input pin is valid when there is a transition in the Enable input pin’s signal from low to high. State of output pin Name Function Data type Time when there is Time when there is a transition in an output pin’s signal from high to low a transition in an output pin’s signal from low to high Valid An output value is valid. BOOL  There is a transition in the Valid output pin’s signal from low to high when there is a transition in the Enable input pin’s signal from low to high.

 There is a transition in the Valid output pin’s signal from high to low when there is a transition in the Enable input pin’s signal from high to low. Busy The motion control function block is being executed. BOOL  There is a transition in the Busy output pin’s signal from low to high when there is a transition in the Enable input pin’s signal from low to high.  There is a transition in the Busy output pin’s signal from high to low when there is a transition in the Error output pin’s signal from low to high.  There is a transition in the Busy output pin’s signal from high to low when there is a transition in the Enable input pin’s signal from high to low.