Mitsubishi — 7.1 Functions of Uniaxial Motion

Chapter 7 Uniaxial Motion  Example 1: Bit [1:0]=00  Motor unit Position: Pulse Speed: Pulse/second (PPS) Target position of the axis specified (P (I)): 10,000 pulses Speed at which the axis specified rotates: 10K PPS After the AH500 series motion control module sends 10,000 pulses, the axis specified can move to the target position specified. (The frequency of pulses is 10K PPS.) The distance for which the axis specified can move after a pulse is sent is calculated according to the physical quantity used.  Example 2: Bit [1:0]=01  Mechanical unit Position: µm Speed:

Centimeter/minute N=0 (SR1003, SR1002)=1,000 (pulses/revolution) (SR1005, SR1004)=100 (micrometers/revolution) P (I)=10,000 (micrometers) V (I)=6 (centimeters/minute) The number of pulses sent by the AH500 series motion control module and the frequency of pulses are calculated below. pulses of Number pulses of Number Revolution Revolution Distance Distance Ч Ч =             Number of pulses it takes for the axis specified to move to the target position specified (pulses) 100,000 B A (I) P A B μm (I) P = Ч = = A 1 B Speed at which the axis specified rotates (V (I)):

6 (centimeters/minute)=60,000/60 (micrometers/second)                      pulse/sec PPS, A 1 B Time pulses of Number pulses of Number Revolution Revolution Distance Time Distance Speed Ч Ч = = The frequency of pulses calculated by the AH500 series motion control module A I V Ч Ч = 60 10 ) ( 4 = 000 , 10 = 100 000 ,1 Ч 60 000 , 60 (PPS)  Example 3 Bit [1:0]=10 or 11  Compound unit Position: Micrometer Speed: Pulse/second (PPS) N=0 (SR1003, SR1002)=2,000 (pulses/revolution) (SR1005, SR1004)=100 (micrometers/revolution) P (I)=10,000 (micrometers) V (I)=10K (PPS) The number of pulses sent by the AH500 series motion control module is calculated below.

Number of pulses it takes for the axis specified to move to the target position specified B (pulses) 200,000 B A (I) P A B μm (I) P = Ч = = 7-9