Chapter 7 Uniaxial Motion 11. Present command speed of the axis specified (Unit) [Description] The value in (SR1039+100*N, SR1038+100*N) is in the range of 0 to 2,147,483,647. The unit used is determined by bit 0 and bit 1 in SR1000+100*N. 12. Operation command [Description] [Description] If a bit in SR1030+100*N is turned from OFF to ON when (SM1048+100*N) is ON, motion will be activated. When bit 0 in SR1030+100*N is turned from OFF to ON, motion decelerates and stops. Please refer to section 7.2~section 7.10 for more information.
7-13 (1+N)th axis HW LW SR1039+100*N SR1038+100*N (1+N)th axis HW LW - SR1030+100*N Special data register SR1030+100*N b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0 - - - The execution of the Ox motion subroutine set starts. A mode of inserting two-speed motion is activated. A mode of two-speed motion is activated. A mode of inserting single-speed motion is activated. A mode of single-speed motion is activated. - A mode of triggering the return to home is activated. A manual pulse generator is operated. A mode of variable motion is activated. The axis specified operates in JOG- mode. The axis specified operates in JOG+ mode. - The motion of the axis specified is stopped by software.