Chapter 8 Electronic Cam 8.2.2 Setting a Master/Slave Axis and Operating an Electronic Cam User can set a master axis and a slave axis, and operate an electronic cam by means of the motion control function block T_CamIn. After the setting of the input pins in the motion control function block T_CamIn is complete, the function set will be enabled if the Enable input pin is set to True. The output pins in the motion control function block T_CamIn can be used to monitor the electronic cam motion set. 8.2.2.1 Setting a Master Axis Users can set a master axis by means of the Master input pin in the motion control function block T_CamIn. 1.
Value of the Master input pin 8-5 Input value Definition Description 0 Manual pulse generator An external manual pulse generator is used as a master axis. 1~16 Motion axis A motion axis is used as a master axis. 200 Counter The counter C200 is used as a master axis. 204 Counter The counter C204 is used as a master axis. 208 Counter The counter C208 is used as a master axis. 212 Counter The counter C212 is used as a master axis. 216 Counter The counter C216 is used as a master axis. 220 Counter The counter C220 is used as a master axis.