Chapter 8 Electronic Cam 8.2.2.3 Setting a Slave Axis Users can set a slave axis by means of the Slave input pin in the motion control function block T_CamIn. 1. Value of the Slave input pin 8.2.3 Starting/Stopping an Electronic Cam Operating Cyclically If an electronic cam operates cyclically, the slave axis of the electronic cam moves in accordance with electronic cam data when the master axis of the electronic cam moves. Electronic cam data defines only one cycle. The relation between the positions of a master axis and the positions of a slave axis is the repeated extension of electronic cam data.
Slave axis M a x =180 (Unit) Electronic cam data Master axis =360 (Unit) M a x 8-7 Input value Definition Description 1~16 Motion axis A motion axis is used as a slave axis.