Mitsubishi — 9.4 Descriptions of G-code Instructions

AH500 Motion Control Module Manual Y-axis End point (Absolute position): (10000,10000) 10000 Speed R (Radius) =5000 5000 Center point Start point (Present position): (5000,5000) Program: G90; G02 X10000 Y10000 R5000 F1000;  Example 2 5000 10000 X-axis Absolute coordinates are set, and G03 is used. The arc start point set is (30, 0, 0), the arc end point set is (0, 30, 15), and L is 30.0. The angle subtended by the arc is less than 180°, and therefore the value of R is a positive value. The axes move at a speed of 1,000 per second. Z-axis Y-axis X-axis Program: G90; G3 X10000 Y10000 R5000 F1000; 9-18 End point: ( 15 30 0 Start point : (30, 0, 0) End point: ( 30