AH500 Motion Control Module Manual A table of values in all the devices is below the description of a PLC type and a firmaware version is. Users can modify the contents of the devices through this table in which M stands for an M device; T stands for a timer; C16b and C16W stand for the state and value of a 16-bit counter; C32b and C32W stand for the state and value of a 32-bit counter;D stands for a D device; and W stands for a W device. 13.4.2 Restoration Before restoring devices, the file to be restored should be placed under the directory \AHMotion\Device\ of a memory card. The operation procedures for restoration are described below. 1. Set ranges for device restoration.
Use SR200~SR213 to define restoration ranges. 2. Set SR214. Set bit 12~bit 0 in SR214. The values of bit 12~bit 0 in SR214 represent a backup file name. 13-6