Delta Electronics AH500 — 8.2.6 Saving and Downloading/Uploading the PLC Parameters

AH500 Operation Manual Select the Enable Web Function checkbox, and the select a language which will be adopted in the drop-down list box. After the parameter is downloaded to the CPU module correctly, users can view the built-in web pages in the CPU module by means of a web browser. *1. The parameters set in HWCONFIG must be downloaded to the CPU module so that they can take effect. (Please refer to section 8.2.6 or section 8.4.4 for more information.) *2. Please refer to operation manuals for more information about the web monitoring function.

8.2.6 Saving and Downloading/Uploading the PLC Parameters After the setting of the PLC parameters is complete, users can click OK to apply the parameters. However, the parameters are still not saved as a file. If users want to save the parameters, they have to click Save on the File menu or on the toolbar after the parameters are applied. After the saving of the parameters is complete, the parameters will be saved as a para file whose primary filename is the project name in the folder in which the project (*.isp) is saved. There are two ways to download or upload the PLC parameters. Users can download/upload the PLC parameters through the functions on the main screen of HWCONFIG.

The hardware configuration and the parameters in the modules will also be downloaded/uploaded. Users can also download/upload the PLC parameters through the functions in the PLC Parameter Setting window. Only the PLC parameters will downloaded/uploaded. The downloading/uploading of the PLC parameters through the functions on the main screen of HWCONFIG will be introduced in section 8.4.4. The downloading/uploading of the PLC parameters through the functions in the PLC Parameter Setting window is introduced here. The PLC parameters will be downloaded after in the upper left corner of the PLC Parameter Setting window is clicked, and the PLC parameters will be uploaded after is clicked. 8-49