AH500 Operation Manual There are two tabs in the window. They are the MDS Information tab and the Normal Exchange Area tab. If users click the MDS Information tab, the version of the MDS document will be displayed. The number of parameters which can be set in the module and the range of setting values depend on the version of the MDS document. Besides, if the parameters in HWCONFIG in a project are created by a newer MDS document, the system asks users to update the MDS document when the users open the HWCONFIG window in the project. If users click the Normal Exchange Area tab, the functions to which the input/output devices assigned to the module correspond will be displayed.
Users can select a parameter type at the left side of the window, and then set the parameters in the table at the right side of the window. The formats of the tables for the parameter types are the same, but the contents of the tables are different. Besides, the number of parameters which can be set and the range of setting values depend on the firmware version of the module which is set. 8-53