Chapter 11 Convenient Functions Link again. If the parameters uploaded are not applicable to the current network configuration, the users can delete the asynchronous devices. Select an asynchronous device which will be deleted, and then click Delete This Asynchronous Node on the Edit menu, or on the toolbar. If the users want to delete all the asynchronous devices at the same time, they can click Synchronize All Nodes on the Edit menu, or on the toolbar. 11.2.2.9 Enabling/Disabling the Online Monitoring Function In the Ether Link Configuration window, users can execute or test the Ether Link constructed by means of the online monitoring functions provided by NWCONFIG.
The users can enable/disable the function of monitoring a single node/multiple nodes online. *. Please refer to section 16.1.3 for more information about the communication setting in NWCONFIG. 11-49 Enabling/Disabling Description Single node Function Enabling or disabling the function of monitoring the node selected online Condition The users have to make sure that ISPSoft can connect to the PLC selected normally, and they have completed the communication setting in NWCONFIG.
Multiple nodes Function Enabling or disabling the function of monitoring all the nodes online Condition The users have to make sure that all the nodes are connected to a network, and can connect to ISPSoft through Ethernet. The connection type that the driver selected in the Driver Name drop-down list box in the Select a Driver window uses must be Ethernet.