Delta Electronics AH500 — 12.4.1 CPU Modules

AH500 Operation Manual 12-42 Error code Description CPU Status LED indicator status ERROR BUS FAULT 16#001B Timed interrupt 0 is set incorrectly. Stop ON Keep 16#001C Timed interrupt 1 is set incorrectly. Stop ON Keep 16#001D Timed interrupt 2 is set incorrectly. Stop ON Keep 16#001E Timed interrupt 3 is set incorrectly. Stop ON Keep 16#001F The watchdog timer is set incorrectly. Stop ON Keep 16#0020 The setting of the fixed scan time is incorrect. Stop ON Keep 16#0021 The setting of the fixed scan time is incorrect. Stop ON Keep 16#0022 The CPU parameter downloaded to the PLC is incorrect.

Stop ON Keep 16#0023 The Y state (STOP->RUN) section in the PLC Parameter Setting window is set incorrectly. Stop ON Keep 16#0024 There is no I/O module on a backplane. Continue Keep Keep 16#0033 The communication setting of COM1 is incorrect. (SM9) Continue Blinking Keep 16#0034 The setting of the station address of COM1 is incorrect. (SM9) Continue Blinking Keep 16#0035 The setting of the communication type of COM1 is incorrect. (SM9) Continue Blinking Keep 16#0038 The communication setting of COM2 is incorrect. (SM9) Continue Blinking Keep 16#0039 The setting of the station address of COM2 is incorrect.

(SM9) Continue Blinking Keep 16#003A The setting of the communication type of COM2 is incorrect. (SM9) Continue Blinking Keep 16#0050 The memories in the latched special auxiliary relays are abnormal. Continue ON Keep 16#0051 The latched special data registers are abnormal. Continue ON Keep 16#0052 The memories in the latched auxiliary relays are abnormal. Continue ON Keep 16#0053 The latched timers are abnormal. Continue ON Keep 16#0054 The latched counters are abnormal. Continue ON Keep 16#0055 The latched 32-bit counters are abnormal. Continue ON Keep 16#0056 The memories in the latched timers are abnormal. Continue ON Keep 16#0057 The memories in the latched counters are abnormal.

Continue ON Keep 16#0058 The memories in the latched 32-bit counters are abnormal. Continue ON Keep 16#0059 The latched data registers are abnormal. Continue ON Keep 16#005A The latched working registers are abnormal. Continue ON Keep 16#005D The CPU module does not detect a memory card. (SM453) Continue Keep Keep 16#005E The memory card is initialized incorrectly. (SM453) Continue Keep Keep 16#005F The data is read from the inexistent file in the memory card, or the data is written into the inexistent file in the memory card. (SM453) Continue Keep Keep 16#0060 The default folder can not be created in the CPU module.

(SM453) Continue Keep Keep 16#0061 The capacity of the memory card is not large enough. (SM453) Continue Keep Keep 16#0062 The memory card is write protected. (SM453) Continue Keep Keep 16#0063 An error occurs when the data is written into the memory card. (SM453) Continue Keep Keep