EPSON — Status and error messages on the control panel

AL-C300 Series User's Guide Troubleshooting The CompactFlash memory is being formatted. Invalid N/W Module Fuser Needed Soon There is no network program, or the network program cannot be used with your printer. Contact a qualified service representative. This warning message indicates that the fuser unit is near the end of its service life. You can continue to print until the Replace Fuser message appears. Invalid PS3 Image Optimum There are errors in the ROM module. Turn off the printer and contact your dealer. There is insufficient memory to print the page at the specified print quality. The printer automatically lowers the print quality so that it can continue printing.

If the quality of the printout is not acceptable, try simplifying the page by limiting the number of graphics or reducing the number and size of fonts. Memory Overflow The printer has insufficient memory to execute the current task. Press the OK button on the control panel to resume printing, or cancel the print job. To cancel the print job, see “Cancelling a Print Job” on page 54 . To clear this warning message, select Clear Warning from the control panel’s Reset Menu . Need Memory Install Fuser The printer has insufficient memory to complete the current print job. The fuser unit is not installed in the printer. Install the fuser unit.

For details, see the instructions that come with the fuser unit. ! Caution: To clear this warning message, select Clear Warning from the control panel’s Reset Menu . To prevent this problem from recurring, reduce the resolution of the image to be printed. If the printer has been in use, the fuser and the surrounding areas may be very hot. If you must touch one of these areas, turn off the printer and wait 40 minutes to allow the heat to subside before doing so. Non-Genuine Toner uuuu Install Photocon uuuu The installed toner cartridge is not a genuine Epson toner cartridge. Installing a genuine toner cartridge is recommended. The photoconductor unit is not installed in the printer.

The letters C, M, Y, or K appear in place of uuuu and indicate the colors Cyan, Magenta, Yellow, and Black respectively. Install the photoconductor unit. For details, see the instructions that come with the photoconductor unit. The printout and remaining service lives of the toner cartridges displayed on the control panel may be different from those when using genuine Epson toner cartridges. Epson shall not be liable for any damages or problems arising from the use of consumable products not manufactured or approved by Epson. Install uuuu Toner Cartridge Press the OK button on the control panel to resume printing. The toner cartridge is not installed in the printer.

The letters C, M, Y, or K appear in place of uuuu and indicate the colors Cyan, Magenta, Yellow, and Black respectively. Install the toner cartridge. See the instructions that come with the toner cartridge. Not Supported USB Device Unsupported USB device is connected. Paper Out tttt sssss Invalid Data There is no paper in the specified paper source ( tttt ). Load paper of the size ( sssss ) into the paper source. The spool file on the driver is deleted while printing or the data is abnormal. Press the OK button to clear the error. Photocon uuuu Needed Soon 62