EPSON — Some part of the graphics or text looks different from what you see on the computer screen

AL-C300 Series User's Guide Troubleshooting Vertical lines appear on the printout The printout is dark The printout is not what you expected Some part of the graphics or text looks different from what you see on the computer screen 73 Cause What to do Condensation may occur. Wait at least one hour before using the printer after moving it from a cool to a warm environment. The printer cannot print in the required quality level because of insufficient memory, and the printer lowers the quality automatically so that the printer can continue printing. Check to see if the printout is acceptable. If not, lower print quality temporarily in the printer driver.

If RAM Disk is set to Maximum or Normal on the control panel, you can increase the available memory space by changing this setting to Off. Cause What to do The exposure window may be dusty. Clean the exposure window. For details, see “Cleaning the exposure window” on page 81. There may be problems with the photoconductor units or the fuser unit. Print several pages to check if the quality of the printouts has improved. If it has not improved, replace the replacement parts with new parts in the following order: - Photoconductor units - Fuser unit For information about replacing parts, see the instructions that come with each replacement parts.

Cause What to do There may be problems with the photoconductor units or the fuser unit. Print several pages to check if the quality of the printouts has improved. If it has not improved, replace the replacement parts with new parts in the following order: - Photoconductor units - Fuser unit For information about replacing parts, see the instructions that come with each replacement parts. Cause What to do The printer emulation setting in your application may be incorrect. Make sure that your application is set for the printer emulation you are using. For example, if you are using the ESC/Page mode, make sure that your application is set to use an ESC/Page printer.