EPSON — Printout is garbled

AL-C300 Series User's Guide Troubleshooting Cannot print in color The printout position is not correct Cannot print all copies The last page of a two-sided printout is printed on the wrong side of the paper (AL-C300DN only) Printout is garbled 74 Cause What to do Black is selected as the Color setting in the printer driver. Change this setting to Color. The color setting in the application you are using is not appropriate for color printing. Make sure that the settings in your application are appropriate for color printing. Cause What to do The page length and margins may be set incorrectly in your application.

Make sure that you are using the correct page length and margin settings in your application. The paper size setting may be incorrect. Make sure the correct paper size is set in the Tray Menu on the control panel. The offset values may be changed in the Printer Adjust Menu. Confirm and adjust the offset values such as Feed Offset or Scan Offset. See “Printer Adjust Menu” on page 90 for details. Cause What to do The printer does not have sufficient memory to collate print jobs. Reduce the contents of print jobs, or increase the available memory on your printer.

When RAM Disk is set to Maximum or Normal on the control panel, you can increase the available memory space by changing this setting to Off. Cause What to do Convert to Simplex is set to Odd Page or 1 Page. For jobs with three or more pages, set Convert to Simplex to Off or 1 Page to do duplex printing. For jobs with just one page, set Convert to Simplex to Off to do duplex printing. Cause What to do The interface cable may not be plugged in securely. Make sure that both ends of the interface cable are plugged in securely. You may not be using the correct interface cable. Use a cable that matches the specifications of the printer. Confirm that there are not breaks in the cable.

If you are using the USB interface, use a cable that is compatible with Hi-Speed USB.