When Installing Internal Options 3-5 The top front drive bay in the A4000 can accommodate a half-height 5.25-inch device such as a CD-ROM, PC floppy, tape, or removable media drive. If this is neither a standard floppy nor an IDE device, you may also need to have a controller board, such as a SCSI adapter, for the device. Turn off and unplug the Amiga before you install any internal expansion device. Disconnect all cables for external peripherals from the Amiga. Installation of internal options should be performed by an authorized Commodore dealer/service center or by a knowledgeable technician.
Commodore will not be liable for any damages or injuries caused by improper installation of expansion equipment. 1. Turning off the Amiga and disconnecting it from the AC power outlet. 6. Reconnecting peripherals and power, performing any software installation or configuration that may be necessary, and testing the device for proper operation. This section and following chapters give general information on installing options in the Amiga. Installing an option inside the Amiga always includes: 2. Disconnecting the mouse and all other external peripherals. When Installing Internal Options 4. Following the expansion device manufacturer's specific installation instructions. 5.
Reassembling the Amiga and replacing the cover. 3. Removing the Amiga's cover. 5.25-lnch Devices Warning