Delta Electronics — 7.2.7 Control Mode

AS Series Module Manual _7 7-22 Operand Data type Function Setting range Description False: Automatic Output the MV according to the PID algorithm. MOUT AUTO _ BOOL MOUT automatic change mode True: Automatic MOUT varies with the MV. False: Normal MOUT does not vary with the MV. AUTO DBW _ DWORD/DINT Range within which the auto tuning is not working 0~32000 Used when the mode is set to auto tuning, within the range of SV ± dead band, the auto tuning is not working. Kc Kp _ REAL Calculated proportional coefficient (Kc or Kp, according to the settings in PID EQ) _ Range of positive single- precision floating- point numbers If the P coefficient is less than 0, the Kc Kp is 0.

_ Independently, if Kc Kp is 0, it is not _ controlled by P. Ti Ki _ REAL Integral coefficient (Ti or Ki, according to the settings in PID EQ) _ Range of positive single- precision floating- point numbers (unit: Ti = sec; Ki = 1/sec) If the calculated coefficient I is less than 0, Ti Ki is 0. If _ Ti Ki is 0, it is not _ controlled by I. Td Kd _ REAL Derivative coefficient (Td or Kd, according to the settings in PID EQ) _ Range of positive single- precision floating- point numbers (unit: sec) If the calculated coefficient D is less than 0, Td Kd is 0. _ If Ti Ki is 0, it is not _ controlled by D.