Delta Electronics — 11.4.4.1. Bit-strobe Work Principle

Chapter 11 DeviceNet Master Scanner Module AS01DNET-A 11 Note : See Section 11.4.5 for further explanation of scan-list node status indication areas and module status indication areas. The input and output mentioned here are defined in the perspective of the master of the entire fieldbus system.  When AS01DNET works in slave mode, the input and output mapping areas for AS01DNET at different positions of the right of AS PLC are listed in the following table. 11.4.4 Bit-strobe Command 11.4.4.1. Bit-strobe Work Principle Bit strobe is one of the standard DeviceNet I/O transmission methods. The command length is fixed to 8 bytes, i.e. 64 bits. (Maximum 64 stations exist in a DeviceNet network .

) One bit corresponds to one node. The following table takes the first AS01DNET on the right of AS PLC for example. When the value of bit0 of D26100 is 0, node 0 is selected and need return data to the master. When the values of bit0 and bit1 of D26100 are both 0, node 0 and node 1 are selected and they need return data to the master. Node 0 Node 1 Node 2 Node 14 In the bit-strobe method, the master does not send control data to the slave node. However, the slave node need return I/O data to the master if the corresponding bit is set to 0. If the corresponding bit is set to 1, the slave node does not need to return I/O data to the master.

11-17 Position of AS01DNET on the right of the PLC Output mapping area (for sending data to Input mapping area (for receiving data from the slave) the slave) Mapping area Data size D register Mapping area Data D register size output data area words data area words Position of Area for sending data to the master Area for receiving data from the master AS01DNET on the right of the D register D register Data length Data length PLC 1 D26100~D26199 100 words D26000~D26099 100 words 2 D26500 – D26599 100 words D26400 – D26499 100 words 3 D26900 – D26999 100 words D26800 – D26899 100 words 4 D27300 – D27399 100 words D27200 – D27299 100 words Bit-strobe Corresponding network node register b15 b14 b13 …

… b1 b0 D26100 Node 15 Node 14 Node 13 … … Node 1 Node 0 D26101 Node 31 Node 30 Node 29 … … Node 17 Node 16 D26102 Node 47 Node 46 Node 45 … … Node 33 Node 32 D26103 Node 63 Node 62 Node 61 … … Node 49 Node 48 D6283 D6282 b31 b30 b18 b17 b16 b15 b14 b2 b1 b0