Wiring ASDA-B3 (A) 3 Step 3: You need the following items to assemble the connector: (A) Big metal case (B) Small metal case (B) (C) (C) Metal ring Step 4: Place the big metal case to cover the exposed wire shielding. Make sure the shielding is completely covered to maintain the integrity of the shielding. Step 5: Fasten the small metal case on the other side. Step 6: Tighten the metal ring to the big metal case. Step 7: Fit one side of the plastic case over the connector. Step 8: Place and fasten the other side of the case to complete the connector. 3-58