Delta Electronics — P0.xxx Monitoring parameters

ASDA-B3 Parameters 8 Settings: Set the value to be monitored in P0.017 through the drive panel or communication. Please refer to P0.002. To get the status, read the communication address through the communication port. For example, if you set P0.017 to 7 to access P0.009, the panel displays the motor speed (rpm). If accessing the data through MODBUS communication, it reads two 16-bit values (0012H and 0013H) as a single 32-bit value. (0013H : 0012H) = (Hi-word : Low-word). Set P0.002 to 23 and the panel displays “VAR-1” and then the value of P0.009. Settings: Set the value to be monitored in P0.018 through the drive panel or communication. Please refer to P0.002.

To get the status, read the communication address through the communication port. Set P0.002 to 24 and the panel displays “VAR-2” and then the value of P0.010. Settings: Set the value to be monitored in P0.019 through the drive panel or communication. Please refer to P0.002. To get the status, read the communication address through the communication port. Set P0.002 to 25 and the panel displays “VAR-3” and then the value of P0.011. 8-15 Address: 0012H P0.009★■ Status monitoring register 1 0013H Default: - Control mode: All Unit: - Setting range: - Format: DEC Data size: 32-bit Address: 0014H P0.010★■ Status monitoring register 2 0015H Default: - Control mode: All Unit: - Setting range:

- Format: DEC Data size: 32-bit Address: 0016H P0.011★■ Status monitoring register 3 0017H Default: - Control mode: All Unit: - Setting range: - Format: DEC Data size: 32-bit Address: 0018H P0.012★■ Status monitoring register 4 0019H Default: - Control mode: All Unit: - Setting range: - Format: DEC Data size: 32-bit