ASDA-B3 Parameters 8 Settings: This setting is the same as P0.025, except its mapping target is set in P0.042. Settings: The formats of the high-bit parameter (PH) and the low-bit parameter (PL) are: Select the data block to access the parameter corresponding to register 1. The mapping value is 32 bits and can map to two 16-bit parameters or one 32-bit parameter. P0.035: (Mapping parameter: P0.035; Mapping content: P0.025) P0.035 P0.025 1. When PH ≠ PL, it indicates that the content of P0.025 includes two 16-bit parameters. Example: Target: set P2.003 to 0 in the mapping parameter and set P2.005 to 100. Setting: set the P0.035 high bit to 0203 (P2.003) and low bit to 0205 (P2.005).
Thus, P0.035 = 0x02030205. P0.035 8-19 Address: 0040H P0.032■ Mapping parameter #8 0041H Default: - Control mode: All Unit: - Setting range: Determined by the corresponding parameter P0.042 Format: HEX Data size: 32-bit P 0.033 - Reserved P0.034 Address: 0046H P0.035 Target setting for mapping parameter P0.025 0047H Default: - Control mode: All - Determined by the communication address of the parameter group Unit: Setting range: Format: HEX Data size:
32-bit High bit Low bit D C BA U Z YX BA Hexadecimal code for the parameter index YX Hexadecimal code for the parameter index C Hexadecimal code for the parameter group Z Hexadecimal code for the parameter group D N/A U N/A Set the parameter to be mapped for P0.025 high bit Set the parameter to be mapped for P0.025 low bit Map the parameter set in P0.035 high bit Map the parameter set in P0.035 high bit P2.003 P2.005