Parameters ASDA-B3 8 Settings: When the forward or reverse speed of the motor is faster than this value, the target speed signal is triggered and DO.TSPD is on. Settings: Maximum rotation speed for analog Speed command: Speed mode: Speed control command = Voltage inputЧSetting value 10 Set the rotation speed corresponding to 10V (maximum voltage) for the analog speed control command. If the value is 2000 and the external voltage input is 5V, then the speed control command is 1000 rpm. Speed control command = 5VЧ2000 rpm 10 = 1000 rpm Torque mode:
Speed limit command = Voltage inputЧSetting value 10 Set the rotation speed corresponding to 10V (maximum voltage) for the analog speed limit command. If the value is 2000 and the external voltage input is 5V, then the speed limit command is 1000 rpm. Speed limit command = 5VЧ2000 rpm 10 = 1000 rpm Settings: Torque mode: Set the torque corresponding to 10V (maximum voltage) for the analog torque command. Torque control command = Voltage inputЧP1.041 10 (Unit: %) 8-46 Address: 014EH P1.039 Target speed detection level 014FH Default: 3000 Control mode: All Unit: rpm Setting range: 0 - 30000 Format: DEC Data size: 16-bit First set of maximum rotation speed for analog Speed Address:
0150H P1.040 command 0151H Default: 3000 Control mode: S / T Unit: rpm Setting range: 0 - 50000 Format: DEC Data size: 32-bit Address: 0152H P1.041▲ Maximum output for analog Torque command 0153H Default: 100 Control mode: All Unit: % Setting range: -1000 to 1000 Format: DEC Data size: 16-bit