Delta Electronics — P1.xxx Basic parameters

ASDA-B3 Parameters 8 Settings: Refer to the description of P1.047. Settings: Refer to the description of P1.053 for the parameter values when connecting the regenerative resistor through different methods. Note: Settings: 8-51 Address: 0162H P1.049 Accumulated time to reach desired speed 0163H Default: 0 Control mode: Unit: ms Setting range: Format: DEC Data size: P 1.050 - Reserved P1.051 Address: 0168H P1.052 Regenerative resistor value 0169H Determined by the model. Refer to the following table. All Default: Control mode: Unit: Ohm Setting range: Refer to the following note. Format: DEC Data size:

16-bit Model Default (Ω) Model Default (Ω) 1.5 kW or below 100 2 - 3 kW (included) 20 Model Setting range Model Setting range 750 W or below 60 - 750 2 - 3 kW 15 - 750 1 - 1.5 kW 30 - 750 - - Address: 016AH P1.053 Regenerative resistor capacity 016BH Determined by the model. Refer to the following table. All Default: Control mode: Unit: Watt Setting range: 0 - 3000 Format: DEC Data size: 16-bit Model Default (Watt) Model Default (Watt) 200 W or below 0 2 - 3 kW (included) 80 400 W - 1.5 kW 40 - -