ASDA-B3 Parameters 8 Settings: Attenuation rate for the second set of low frequency vibration elimination. Settings: 1. When P1.074.Y = 0 (output source is from the encoder connected to CN2): (a) When P1.097 = 0, OA / OB pulse output refers to the value of P1.046. (Refer to Example 1.) (b) When P1.097 ≠ 0, OA / OB pulse output refers to the values of P1.046 and P1.097. (Refer to Example 2.) 2. When P1.074.Y = 2 (output source is the pulse command from CN1): (a) When P1.097 = 0, OA / OB pulse output does not refer to the value of P1.046, but outputs according to the ratio of 1:1 instead. (b) When P1.097 ≠ 0, OA / OB pulse output refers to the values of P1.046 and P1.097.
(Refer to Example 2.) Example 1 (the value must be multiplied by 4 times the frequency): When P1.097 = 0 and P1.046 = 2500, OA / OB output is P1.046 multiplied by 4 times the frequency, which is 10,000 pulses. Example 2 (the calculated value does not need to be multiplied by 4 times the frequency): When P1.097 = 7 and P1.046 = 2500, OA / OB output = 2500 7 8-61 Address: 01BCH P1.094 Second set of vibration elimination - resonance difference 01BDH Default: 10 Control mode: Unit: 0.1 dB Setting range: Format: DEC Data size: P 1.095 - Reserved P 1.096 Address: 01C2H P1.097▲ Encoder output denominator (OA, OB) 01C3H Default: 0 Control mode: All Unit: - Setting range: 0 - 160000 Format:
DEC Data size: 32-bit