Delta Electronics — P2.xxx Extension parameters

ASDA-B3 Parameters 8 Settings: Refer to the description of P2.010. Settings: Refer to the description of P2.010. Settings: Refer to the description of P2.010. Settings: Refer to the description of P2.010. There is no physical pin for DI5 on B3-F, B3-E, and B3-M models. DI5 is a virtual digital input which you can use when the number of physical DI points is insufficient and trigger through communication. You can set this virtual DI for a normally closed contact if the DI has to switch on as soon as power is applied, such as DI.SON. 8-67 Address: 0216H P2.011 DI2 functional planning 0217H 0x0104 (B3-L) 0x0022 (B3-F, E, M) All Default: Control mode:

- 0x0000 - 0x015F (last two codes are DI codes) Unit: Setting range: Format: HEX Data size: 16-bit Address: 0218H P2.012 DI3 functional planning 0219H 0x0116 (B3-L) 0x0023 (B3-F, E, M) All Default: Control mode: - 0x0000 - 0x015F (last two codes are DI codes) Unit: Setting range: Format: HEX Data size: 16-bit Address: 021AH P2.013 DI4 functional planning 021BH 0x0117 (B3-L) 0x0021 (B3-F, E, M) All Default: Control mode: - 0x0000 - 0x015F (last two codes are DI codes) Unit: Setting range: Format: HEX Data size: 16-bit Address: 021CH P2.014 DI5 functional planning 021DH 0x0102 (B3-L) 0x0100 (B3-F, E, M) All Default: Control mode: - 0x0000 - 0x015F (last two codes are DI codes) Unit:

Setting range: Format: HEX Data size: 16-bit