Parameters ASDA-B3 8 Settings: Refer to the description of P2.010. There is no physical pin for DI6 on B3-F, B3-E, and B3-M models. DI6 is a virtual digital input which you can use when the number of physical DI points is insufficient and trigger through communication. You can set this virtual DI for a normally closed contact if the DI has to switch on as soon as power is applied, such as DI.SON. Settings: Refer to the description of P2.010. There is no physical pin for DI7 on B3-F, B3-E, and B3-M models. DI7 is a virtual digital input which you can use when the number of physical DI points is insufficient and trigger through communication.
You can set this virtual DI for a normally closed contact if the DI has to switch on as soon as power is applied, such as DI.SON. Settings: Refer to the description of P2.010. There is no physical pin for DI8 on B3-F, B3-E, and B3-M models. DI8 is a virtual digital input which you can use when the number of physical DI points is insufficient and trigger through communication. You can set this virtual DI for a normally closed contact if the DI has to switch on as soon as power is applied, such as DI.SON. 8-68 Address: 021EH P2.015 DI6 functional planning 021FH 0x0022 (B3-L) 0x0100 (B3-F, E, M) Default: Control mode: - Unit: Setting range: Format: HEX Data size: Address:
0220H P2.016 DI7 functional planning 0221H 0x0023 (B3-L) 0x0100 (B3-F, E, M) All Default: Control mode: - 0x0000 - 0x015F (last two codes are DI codes) Unit: Setting range: Format: HEX Data size: 16-bit P2.017 DI8 functional planning Address: 0222H 0223H 0x0021 (B3-L) 0x0100 (B3-F, E, M) All Default: Control mode: - 0x0000 - 0x015F (last two codes are DI codes) Unit: Setting range: Format: HEX Data size: 16-bit