Delta Electronics — P2.xxx Extension parameters

ASDA-B3 Parameters 8 Settings: YX Z U  YX: output function selection Refer to Table 8.2.  Z: output contact: A or B contact 0: set this output contact to be normally closed (B contact). 1: set this output contact to be normally open (A contact). Refer to the description of P2.018. Settings: Settings: Refer to the description of P2.018. 8-69 Address: 0224H P2.018 DO1 functional planning 0225H 0x0101 (B3-L) 0x0100 (B3-F, E, M) Default: Control mode: - Unit: Setting range: Format: HEX Data size: YX Output function selection Z Output contact: A or B contact - - U Reserved Address: 0226H P2.019 DO2 functional planning 0227H 0x0103 (B3-L) 0x0100 (B3-F, E, M) All Default: Control mode:

- 0x0000 - 0x013F (last two codes are DO codes) Unit: Setting range: Format: HEX Data size: 16-bit Address: 0228H P2.020 DO3 functional planning 0229H 0x0109 (B3-L) 0x0100 (B3-F, E, M) All Default: Control mode: - 0x0000 - 0x013F (last two codes are DO codes) Unit: Setting range: Format: HEX Data size: 16-bit