Parameters ASDA-B3 8 Settings: Refer to the description of P2.010. There is no physical pin for DI10 on all models. DI10 is a virtual digital input which you can use when the number of physical DI points is insufficient and trigger through communication. You can set this virtual DI for a normally closed contact if the DI has to swtich on as soon as power is applied, such as DI.SON. Settings: Refer to the description of P2.010. There is no physical pin for DI11 on all models. DI11 is a virtual digital input which you can use when the number of physical DI points is insufficient and trigger through communication.
You can set this virtual DI for a normally closed conact if the DI has to swtich on as soon as power is applied, such as DI.SON. Settings: Refer to the description of P2.010. There is no physical pin for DI12 on all models. DI12 is a virtual digital input which you can use when the number of physical DI points is insufficient and trigger through communication. You can set this virtual DI for a normally closed contact if the DI has to switch on as soon as power is applied, such as DI.SON. 8-76 Address: 024AH P2.037 DI10 functional planning 024BH Default: 0x0100 Control mode: Unit: - Setting range: Format: HEX Data size: Address: 024CH P2.038 DI11 functional planning 024DH Default:
0x0100 Control mode: All - 0x0000 - 0x015F (last two codes are DI codes) Unit: Setting range: Format: HEX Data size: 16-bit Address: 024EH P2.039 DI12 functional planning 024FH Default: 0x0100 Control mode: All - 0x0000 - 0x015F (last two codes are DI codes) Unit: Setting range: Format: HEX Data size: 16-bit