Delta Electronics — P2.xxx Extension parameters

ASDA-B3 Parameters 8 Settings: Refer to the description of P2.010. There is no physical pin for DI13 on all models. DI13 is a virtual digital input which you can use when the number of physical DI points is insufficient and trigger through communication. You set this virtual DI for a normally closed contact if the DI has to switch on as soon as power is applied, such as DI.SON. Settings: Refer to the description of P2.018. Settings: The second setting for resonance frequency. This function is disabled if P2.044 is 0. Settings: The second Notch filter attenuation level. A value of 5 indicates -5 dB. 8-77 Address: 0250H P2.040 DI13 functional planning 0251H Default: 0x0100 Control mode:

All Unit: - Setting range: 0x0000 - 0x015F (last two codes are DI codes) Format: HEX Data size: 16-bit Address: 0252H P2.041 DO6 functional planning 0253H Default: 0x0100 Control mode: All - 0x0000 - 0x013F (last two codes are DO codes) Unit: Setting range: Format: HEX Data size: 16-bit P 2.042 Reserved Address: 0256H P2.043 Notch filter frequency (2) 0257H Default: 1000 Control mode: All Unit: Hz Setting range: 50 - 5000 Format: DEC Data size: 16-bit Address: 0258H P2.044 Notch filter attenuation level (2) 0259H Default: 0 Control mode: All Unit: -dB Setting range: 0 - 40 (0: disable this function) Format: DEC Data size: 16-bit