ASDA-B3 Parameters 8 Settings: Bit Bit 8-85 Address: 0284H P2.066 Special bit register 2 0285H Default: 0x0000 Control mode: Unit: - Setting range: Format: HEX Data size: 7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 Bit Function Description Bit 0 - Bit 1 Reserved - Bit 2 Low voltage error (AL003) latch switch 0: enable the function, so the low voltage error is not cleared automatically. 1: disable the function, so the low voltage error is cleared automatically. Bit 3 Reserved - Bit 4 AL044 detection (servo function overload warning) function switch 0: enable the function. 1: disable the function. Bit 5 Reserved - Bit 6 Leak phase error latch 0:
disable the function, so leak phase error (AL022) is cleared automatically. 1: enable the function, so leak phase error (AL022) is not cleared automatically. Bit 7 - Bit 8 Reserved - Bit 9 Low voltage error (AL003) error type selection 0: set AL003 as WARN. 1: set AL003 as ALM. Bit 10 - Bit 11 Reserved - Bit 12 RST leak phase (AL022) error type selection 0: set AL002 as WARN. 1: set AL002 as ALM. Bit 13 - Bit 15 Reserved - P2.067 Reserved