Parameters ASDA-B3 Definition of each setting value: 8 Settings: The first speed setting for high speed homing. First high speed homing First high speed homing ORG Z pulse Z pulse 8-108 U Z Y X Reserved Limit setting Z pulse setting Homing method - 0 - 1 0 - 2 0 - 8 - Y = 0: return to Z pulse Y = 1: go forward to Z pulse Y = 2: do not look for Z pulse X = 0: homing in forward direction and define the positive limit as the homing origin X = 1: homing in reverse direction and define the negative limit as the homing origin When reaching the limit: Z = 0: show error Z = 1: reverse direction X = 2: homing in forward direction, ORG: OFFON as the homing origin X = 3:
homing in reverse direction, ORG: OFFON as the homing origin - X = 4: look for Z pulse in forward direction and define it as the homing origin X = 5: look for Z pulse in reverse direction and define it as the homing origin Y = 0: return to Z pulse Y = 1: go forward to Z pulse Y = 2: do not look for Z pulse X = 6: homing in forward direction, ORG: ONOFF as the homing origin X = 7: homing in reverse direction, ORG: ONOFF as the homing origin - - X = 8: define current position as the origin When reaching the limit: Z = 0: show error Z = 1: reverse direction Y = 0: return to Z pulse Y = 2: do not look for Z pulse X = 9: torque homing in forward direction X = A:
torque homing in reverse direction Address: 050AH P5.005 High speed homing (first speed setting) 050BH Operation Panel / software Communication PR (set with P5.004) Control mode: interface: Default: 100.0 1000 Data size: 32-bit Unit: 1 rpm 0.1 rpm - - Setting range: 0.1 - 2000.0 1 - 20000 - - Format: DEC DEC - - Example: 1.5 = 1.5 rpm 15 = 1.5 rpm - - Second low ORG homing