ASDA-B3 Parameters 8 8-177 Value: 0x1D Triggering Control DI name Description method mode ABSE When DI.ABSE is on, it is in absolute mode and can enable the functions of DI.ABSQ, DI.ABSR, DI.ABSD, and DI.ABSC at the same time. When DI.ABSE is on, the functions of DI4, DO2, and DO3 are no longer the ones assigned by the parameter. The DI4 function will be DI.ABSQ, DO2 will be DI.ABSR, and DO3 will be DI.ABSD. In addition, DI pin of DI.ABSC can be assigned by parameters. Level triggered All Value: 0x1F Triggering Control DI name Description method mode ABSC When DI.ABSC is on, the number of turns stored in absolute encoder are cleared. But this DI is only valid when DI.ABSE is on.
Rising-edge triggered All Value: when DI.ABSE is on, the DI.ABSQ from DI4 replaces the DI4 function from P2.013 Triggering Control DI name Description method mode ABSQ always input by DI4 During I/O transmission, the controller sends the handshaking signal. When DI.ABSQ is off, the controller issues the request; when DI.ABSQ is on, the controller has processed the ABSD signal. This DI is only valid when DI.ABSE is on. Refer to Figure 10.3.5.1.1 for the timing diagram. Rising- and falling-edge triggered All Value:
0x14, 0x15 Triggering Control DI name Description method mode SPD0 SPD1 Register Speed command selection (1 - 4) Level triggered S, Sz Speed DI signal of CN1 command SPD1 SPD0 Command source Content Range number S1 0 0 S External analog signal Voltage difference between V-REF and GND -10V to +10V Sz N/A Speed command is 0 0 S2 0 1 Internal register parameter P1.009 +/- 6000 rpm S3 1 0 P1.010 +/- 6000 rpm S4 1 1 P1.011 +/- 6000 rpm Value:
0x16, 0x17 Triggering Control mode DI name Description method TCM0 TCM1 Register Torque command selection (1 - 4) Level triggered T, Tz Torque DI signal of CN1 command TCM1 TCM0 Command source Content Range number T1 0 0 T External analog signal Voltage difference between T REF _ and GND -10V to +10V Tz N/A Torque command is 0 0 T2 0 1 Internal register parameter P1.012 +/- 500% T3 1 0 P1.013 +/- 500% T4 1 1 P1.014 +/- 500%