Delta Electronics — Table 8.1 Digital input (DI) descriptions

Parameters ASDA-B3 8 8-178 Value: 0x18 Triggering Control DI name Description method mode S-P In S-P dual mode, if DI is off, it is in Speed mode; if DI is on, it is in Position mode. In PT / PR / S modes, select PT or PR with DI.PT-PR (0x2B). Level triggered Value: 0x19 Triggering Control DI name Description method mode S-T In S-T dual mode, if DI is off, it is in Speed mode; if DI is on, it is in Torque mode. Level triggered Dual mode Value: 0x20 Triggering Control DI name Description method mode T-P In T-P dual mode, if DI is off, it is in Torque mode; if DI is on, it is in Position mode. In PT / PR / T modes, select PT or PR with DI.PT-PR (0x2B). Level triggered Dual mode Value:

0x21 Triggering Control DI name Description method mode EMGS When this DI is on, the motor stops immediately. Level triggered All Value: 0x22 Triggering Control DI name Description method mode NL (CWL) Negative inhibit limit (contact B). Level triggered All Value: 0x23 Triggering Control DI name Description method mode PL (CCWL) Positive inhibit limit (contact B). Level triggered All Value: 0x24 Triggering Control DI name Description method mode ORGP During homing, when this DI is on, the servo uses this position as the homing origin. Refer to the setting of P5.004. Rising- and falling-edge triggered PR Value:

0x27 Triggering Control DI name Description method mode SHOM During homing, when this DI is on, it activates the function to search for the origin. Refer to the setting of P5.004. Rising-edge triggered PR